Часто задаваемые вопросы
Ответить
Аватара пользователя
AlexSPB
Сообщения: 5168
Зарегистрирован: 15 дек 2005, Чт 13:47
Откуда: Пенза
Контактная информация:

Сообщение 26 ноя 2006, Вс 0:54

на английском, но по картинкам и так все понятно

Before starting you only really need a screw driver and a small and large flat planel screw driver.
Move the window all the way down and open the door.

1. To begin, remove the plastic housing which holds the tweeters. This is normall done quite easily by pulling on the side. Once thats done it should look like this.
(be careful not to accidentally snap off the plastic clip located in the center of the inner hosing)
Изображение

2. Once thats off, you need a small flat panel screwdriver like mine and wrap it up in some duck take to product your door.
Изображение

3. Under the door handle it self you should find a small opening, stick in your protected flat screw driver and prey it open gently. Do not put too much force as it could ruin the plastic (like mine... :( )
Изображение

4. Once you pull of the plastic off, you should see 6 screws thats holding in the door handle, remove these.
Изображение

5. Located behind the handle you should feel a small hole.
Изображение

Using a Allen key you can easily pop the panel off.
Изображение

This is what it should look like.
Изображение

6. At the top of the door handle, there are 2 more screws to undo.
Изображение

7. Now you can simply pull out the handle unit.
Изображение

Becareful becuase the wires are still connected to this unit. Unclip the harness.
Изображение

Now all is left is to pull the door card itself off.

*my pictures came out quite bad. Sorry no pictures at this time*


. You can see the speaker itself. Quite bad arn't they?
Изображение

Well the next part is going to be quite tough.

If you dont want to break the clips connecting the speaker to the door then get your large flat panel screw driver and push down on the clipping. It does require a bit of force but keep at it and you should release it from its housing.
Изображение

At the bottom of the speaker there are 2 plastic clippings, the speaker will pop out from the metal clip and the plastic should follow easily.
Изображение

. Unplug the clippings from the speaker and you should be left with a large hole for your new speakers.

Изображение

оригинал тут http://civictype-r.co.uk/phpbb2/posting ... e&p=843641

Аватара пользователя
nodexgostr
Сообщения: 784
Зарегистрирован: 10 мар 2016, Чт 15:31
Контактная информация:

Сообщение 17 ноя 2022, Чт 17:43

почему в этой теме так гавной завоняло? нахуй ты это гавно сюда запихнул?
sonar official dealer

Аватара пользователя
bass_urman
Сообщения: 8726
Зарегистрирован: 08 ноя 2009, Вс 0:27
Откуда: Липецк
Контактная информация:

Сообщение 17 ноя 2022, Чт 17:58

nodexgostr писал(а): почему в этой теме так гавной завоняло? нахуй ты это гавно сюда запихнул?
Он это написал 16 лет назад блять
16
boyan 2.4 MT 05 black edishn tipe-S

Аватара пользователя
nodexgostr
Сообщения: 784
Зарегистрирован: 10 мар 2016, Чт 15:31
Контактная информация:

Сообщение 17 ноя 2022, Чт 22:20

Это такой прикол от хоста картинок :D
sonar official dealer

Ответить

Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 2 гостя