REDLINERS.RU

Open Bonnet


Remove intake cover


Pull Wiring harness out of little rubber clip thing


Loosen jubilee clip on throttle body


Unplug IAT sensor and pull out sensor from intake tubing


Remove rubber pipe from airbox end only, then remove vacumn pipe from intake tubing



Remove rubber intake pipe


Remove rubber bung and long bolt from air box



Disconnect bottom intake hose from airbox, remove two nuts that hold it to the slam panel and remove from engine bay



Remove 1 bolt and 1 nut that holds airbox on



Remove air box



Fit spacer


Carefully remove old pipe from orignal air box


DO NOT USE MONKEY FOR STEP 15 COS YOU WILL BREAK IT!


Fit silicon rubber thingy


Pick up AEM pipe and fit


Insert AEM pipe complete with filter and clamp to throttle body with jubilee clip


Reconnect vacumn pipe, you will need to remove the little metal thing first (1st pic) and return feed (2nd pic)



Insert IAT sensor into grommet in AEM pipe


Bolt the beast down!


Admire your work!