- Mura
- Сообщения: 6022
- Зарегистрирован: 12 янв 2006, Чт 12:54
- Откуда: Korolev Moscow Russia
- Контактная информация:
тюнинг Honda Nissan
Competition Clutch/Exedy, Tial, CP Pistons, M-Factory, Ferrea, Rotrex, Garrett.
True Zirconia Керамическое напыление выпуска и поршней.
Настройка на диностенде Hondata/ UpRev/ UniChip/ ViPec/ AEM. Чип-тюнинг любых ECU
Competition Clutch/Exedy, Tial, CP Pistons, M-Factory, Ferrea, Rotrex, Garrett.
True Zirconia Керамическое напыление выпуска и поршней.
Настройка на диностенде Hondata/ UpRev/ UniChip/ ViPec/ AEM. Чип-тюнинг любых ECU
- Bladerunner
- Сообщения: 2281
- Зарегистрирован: 11 мар 2007, Вс 13:44
- Откуда: Москва
- Контактная информация:
Нада брать.Mura писал(а):http://www.hondata.com/flashpro.html
Ты уже его купил ?

Дим, я вот одного момента пока не догнал - он должен быть постоянно установлен на машину, или это "классический рефлэшер" ?
Последний раз редактировалось Bladerunner 09 май 2009, Сб 22:05, всего редактировалось 1 раз.
На зарубежных сайтах уже обсуждают, хотя выйдет чуть позже. Типа позволяет шить родные мозги сивки тапки?
Типа подпись!
- Bladerunner
- Сообщения: 2281
- Зарегистрирован: 11 мар 2007, Вс 13:44
- Откуда: Москва
- Контактная информация:
Все хонды с 2006 года, в потенциале...felix писал(а): Типа позволяет шить родные мозги сивки тапки?
- Mura
- Сообщения: 6022
- Зарегистрирован: 12 янв 2006, Чт 12:54
- Откуда: Korolev Moscow Russia
- Контактная информация:
Bladerunner писал(а):Нада брать.Mura писал(а):http://www.hondata.com/flashpro.html
Ты уже его купил ?
Дим, я вот одного момента пока не догнал - он должен быть постоянно установлен на машину, или это "классический рефлэшер" ?
по логике нет
просто софт и рефлешер
скорей всего бьются сейчас над залочиванием всего там и вся
но тогда неясно как Хондате рубить бабло, если дилер купил один девайс и шьет всех подряд
тюнинг Honda Nissan
Competition Clutch/Exedy, Tial, CP Pistons, M-Factory, Ferrea, Rotrex, Garrett.
True Zirconia Керамическое напыление выпуска и поршней.
Настройка на диностенде Hondata/ UpRev/ UniChip/ ViPec/ AEM. Чип-тюнинг любых ECU
Competition Clutch/Exedy, Tial, CP Pistons, M-Factory, Ferrea, Rotrex, Garrett.
True Zirconia Керамическое напыление выпуска и поршней.
Настройка на диностенде Hondata/ UpRev/ UniChip/ ViPec/ AEM. Чип-тюнинг любых ECU
- Bladerunner
- Сообщения: 2281
- Зарегистрирован: 11 мар 2007, Вс 13:44
- Откуда: Москва
- Контактная информация:
Ну да, пока сафсэм нипанятна...Mura писал(а):но тогда неясно как Хондате рубить бабло, если дилер купил один девайс и шьет всех подряд

Пишут
Yes, for 3 months from the date of release a discount is offered to existing Civic Si reflash owners. In order to qualify for the discount, the ECU will need to be sent to Hondata to verify the reflash.
Типа надо все равно прислать свой моск, и наверно будет привязка к мозгу, то действительно фигня какая-то получается, один взял и всех шьет? Не по американски, где бабло сшибать?
Yes, for 3 months from the date of release a discount is offered to existing Civic Si reflash owners. In order to qualify for the discount, the ECU will need to be sent to Hondata to verify the reflash.
Типа надо все равно прислать свой моск, и наверно будет привязка к мозгу, то действительно фигня какая-то получается, один взял и всех шьет? Не по американски, где бабло сшибать?

Типа подпись!
- Mura
- Сообщения: 6022
- Зарегистрирован: 12 янв 2006, Чт 12:54
- Откуда: Korolev Moscow Russia
- Контактная информация:
felix писал(а):Пишут
Yes, for 3 months from the date of release a discount is offered to existing Civic Si reflash owners. In order to qualify for the discount, the ECU will need to be sent to Hondata to verify the reflash.
Типа надо все равно прислать свой моск, и наверно будет привязка к мозгу, то действительно фигня какая-то получается, один взял и всех шьет? Не по американски, где бабло сшибать?
это про другое
скидку тем, кто уж купил рефлеш ранее
тюнинг Honda Nissan
Competition Clutch/Exedy, Tial, CP Pistons, M-Factory, Ferrea, Rotrex, Garrett.
True Zirconia Керамическое напыление выпуска и поршней.
Настройка на диностенде Hondata/ UpRev/ UniChip/ ViPec/ AEM. Чип-тюнинг любых ECU
Competition Clutch/Exedy, Tial, CP Pistons, M-Factory, Ferrea, Rotrex, Garrett.
True Zirconia Керамическое напыление выпуска и поршней.
Настройка на диностенде Hondata/ UpRev/ UniChip/ ViPec/ AEM. Чип-тюнинг любых ECU
Дим, в чем подвох? Интересно... Неужели все, свобода... И настраивай все и вся? 

Типа подпись!
- Bladerunner
- Сообщения: 2281
- Зарегистрирован: 11 мар 2007, Вс 13:44
- Откуда: Москва
- Контактная информация:
ВОТ:
- Will this work on more than one vehicle?
The FlashPro is locked to one vehicle. It can be unlocked and transferred to another vehicle by returning the ECU to stock.
Залочен он.
http://www.8thcivic.com/forums/bolt-ons ... shpro.html
- Will this work on more than one vehicle?
The FlashPro is locked to one vehicle. It can be unlocked and transferred to another vehicle by returning the ECU to stock.
Залочен он.
http://www.8thcivic.com/forums/bolt-ons ... shpro.html
- Mura
- Сообщения: 6022
- Зарегистрирован: 12 янв 2006, Чт 12:54
- Откуда: Korolev Moscow Russia
- Контактная информация:
Bladerunner писал(а):ВОТ:
- Will this work on more than one vehicle?
The FlashPro is locked to one vehicle. It can be unlocked and transferred to another vehicle by returning the ECU to stock.
Залочен он.
http://www.8thcivic.com/forums/bolt-ons ... shpro.html
хитрО
тюнинг Honda Nissan
Competition Clutch/Exedy, Tial, CP Pistons, M-Factory, Ferrea, Rotrex, Garrett.
True Zirconia Керамическое напыление выпуска и поршней.
Настройка на диностенде Hondata/ UpRev/ UniChip/ ViPec/ AEM. Чип-тюнинг любых ECU
Competition Clutch/Exedy, Tial, CP Pistons, M-Factory, Ferrea, Rotrex, Garrett.
True Zirconia Керамическое напыление выпуска и поршней.
Настройка на диностенде Hondata/ UpRev/ UniChip/ ViPec/ AEM. Чип-тюнинг любых ECU
Yes. No. Only 1 ECU at a time.
http://www.hondata.com/forum/viewtopic.php?t=9391
ill try to help where i can
1) it will only work with one ECU, what is the point if it cant, the would only sell one and that person could tune everyone.......so yes only one car/ecu at a time
chris2000 wrote:
1. So does that mean 1 unit Hondata flashpro can only work with one ecu or car only? Which mean i can't buy one set flashpro and used it together with a few of my buddies civics?
2. Does it have control over DBW?
3. Any option of immobilizer control?
4. 90 sec programming - does that mean it can't do real time tuning?
5. If the ECU had been reflashed by another maker, can Flashpro still work?
1. On ECU and vehicle at a time. You can unlock the FlashPro by returning the ECU to stock, and then transfer to another vehicle.
2. Yes, but we don't change anything to do with DBW. The first reason is that there is no need to - the DBW control works fairly well as it is. The second reason is for legal liability.
3. The immobilizer can not be disabled. We've implemented a number of features designed to protect the owner of the vehicle from theft, and one of these is not to allow the immobilizer to be disabled. This is going to be much less of an issue than previous products because the ECU does not need to be removed / swapped.
4. Correct. In any case, if you are tuning a vehicle, you need to wait longer than 90 seconds between dyno runs in order to maintain consistency between runs. If you think you could set the dyno up as constant rpm or load, and then tune each cell in each table, this type of tuning does not work because the engine temperature and therefore output changes fairly rapidly, prohibiting this type of tuning.
5. Probably - we could tell you based off the ECU part & serial numbers plus the calibration ID. When you unlock the FlashPro it will only be reflashed back to a stock calibration.
The PROflash unit will be locked to one ECU/Car at a time, in order to flash another car you will be required to uninstall the tune and revert back to stock
Получаеться, купил, попользовался, вернул в сток, переход к другой машине.
http://www.hondata.com/forum/viewtopic.php?t=9391
ill try to help where i can
1) it will only work with one ECU, what is the point if it cant, the would only sell one and that person could tune everyone.......so yes only one car/ecu at a time
chris2000 wrote:
1. So does that mean 1 unit Hondata flashpro can only work with one ecu or car only? Which mean i can't buy one set flashpro and used it together with a few of my buddies civics?
2. Does it have control over DBW?
3. Any option of immobilizer control?
4. 90 sec programming - does that mean it can't do real time tuning?
5. If the ECU had been reflashed by another maker, can Flashpro still work?
1. On ECU and vehicle at a time. You can unlock the FlashPro by returning the ECU to stock, and then transfer to another vehicle.
2. Yes, but we don't change anything to do with DBW. The first reason is that there is no need to - the DBW control works fairly well as it is. The second reason is for legal liability.
3. The immobilizer can not be disabled. We've implemented a number of features designed to protect the owner of the vehicle from theft, and one of these is not to allow the immobilizer to be disabled. This is going to be much less of an issue than previous products because the ECU does not need to be removed / swapped.
4. Correct. In any case, if you are tuning a vehicle, you need to wait longer than 90 seconds between dyno runs in order to maintain consistency between runs. If you think you could set the dyno up as constant rpm or load, and then tune each cell in each table, this type of tuning does not work because the engine temperature and therefore output changes fairly rapidly, prohibiting this type of tuning.
5. Probably - we could tell you based off the ECU part & serial numbers plus the calibration ID. When you unlock the FlashPro it will only be reflashed back to a stock calibration.
The PROflash unit will be locked to one ECU/Car at a time, in order to flash another car you will be required to uninstall the tune and revert back to stock
Получаеться, купил, попользовался, вернул в сток, переход к другой машине.

Типа подпись!
судя по всему как то очень много геммороя с этим девайсом!!!!
Бери , проверим.Speedy писал(а):судя по всему как то очень много геммороя с этим девайсом!!!!

Типа подпись!
да я думаю Дима и без меня возьмет.. сейчас уже много кого надо строить ею....
- Bladerunner
- Сообщения: 2281
- Зарегистрирован: 11 мар 2007, Вс 13:44
- Откуда: Москва
- Контактная информация:
А кроме тебя-то кого ?Speedy писал(а):сейчас уже много кого надо строить ею....

а че только я один чтоль! много же желающих атмо подстроить и т.д. и там 5Д строить надо...Bladerunner писал(а):А кроме тебя-то кого ?Speedy писал(а):сейчас уже много кого надо строить ею....
я не против купить только Дима говорит что не надо оно мне....
- Bladerunner
- Сообщения: 2281
- Зарегистрирован: 11 мар 2007, Вс 13:44
- Откуда: Москва
- Контактная информация:
Speedy писал(а):там 5Д строить надо...Bladerunner писал(а):А кроме тебя-то кого ?Speedy писал(а):сейчас уже много кого надо строить ею....
Оно пока будед только на FN2, SI и FD2R.
ну тогда я один получается нуждаюсь!)))))
- Bladerunner
- Сообщения: 2281
- Зарегистрирован: 11 мар 2007, Вс 13:44
- Откуда: Москва
- Контактная информация:

Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 12 гостей